Data Centers & Critical Infrastructure

Data centers and critical infrastructure in Morocco

Sertronix designs, builds and maintains data centers, server rooms and technical rooms in Morocco, from first study to maintenance, for organisations that stop when their IT stops.

01

What we do

  • Studies and designAudit of the existing site, power and heat load assessment, room layout (hot and cold aisles, containment), drawings and construction documents.
  • PowerDedicated switchboards, UPS and batteries, redundant A/B distribution, intelligent PDUs, generator connection.
  • CoolingRoom or in-row precision cooling, aisle containment, measuring and balancing server inlet temperatures.
  • Racks and cablingServer and network racks, copper and fibre cabling, cable trays, full labelling.
  • Room securityAccess control, CCTV, fire detection, gas suppression delivered with a specialist installer, water leak detection.
  • Monitoring (DCIM)Sensors, energy and PUE metering, alarms and dashboards across multi-vendor installations.
  • Micro data centersEdge DC 5, our all-in-one cabinet for sites where building a room makes no sense.Discover Edge DC 5 →

02

Standards and methods

We work first with European and French standards, on which most Moroccan standards (NM) are based, and with American standards when the client or its group requires them.

Europe and France — the reference in Morocco

  • EN 50600Data center design and operation (power, cooling, cabling, security, availability classes).
  • NF C 15-100 / IEC 60364Low-voltage electrical installations.
  • EN 50173, EN 50174 and ISO/IEC 11801Cabling, with certifier testing and a report for every link.
  • EN 54 · ISO 14520Fire detection; gas suppression.

United States — on request

  • ANSI/TIA-942Data center architecture and redundancy.
  • Uptime Institute Tier conceptsLevels I to IV. Certification itself is issued by the Uptime Institute.
  • ASHRAE TC 9.9Room temperature and humidity ranges.
  • NFPA 75 and NFPA 2001Fire protection of IT rooms and gas suppression.
  • TIA-568 and TIA-606Cabling and labelling.

03

How a project runs

  1. 01StudySite visit, surveys, load measurements and site constraints.
  2. 02DesignArchitecture, calculations, drawings, equipment selection, schedule.
  3. 03SupplyProcurement and inspection of equipment before delivery.
  4. 04InstallationPhased works, including in a live room.
  5. 05TestingPower transfer, cooling and alarm tests, cabling acceptance.
  6. 06CommissioningHandover with your team, as-built documents and training.
  7. 07MaintenancePreventive visits, corrective work, written reports.

04

Experience

Our team has delivered projects on critical sites in Morocco, before and since Sertronix was founded:

  • Banking and paymentsTier III data centers, including a complete computer room, and the design of a bank's data center.
  • TelecomCabling of an operator's data center and of an international submarine cable landing station.
  • LogisticsIT infrastructure for an international group's platforms in several Moroccan cities.

See references →

05

Brands we deploy

A few of the brands we install and maintain. We work with dozens of manufacturers and are not limited to this list. We choose equipment for each project and for the service available in Morocco.

  • Vertiv
  • Schneider Electric
  • Conteg
  • Sunbird
  • Siemens
  • Aginode
  • Corning
  • R&M

Trademarks belong to their respective owners.

06

Frequently asked questions

Can you work in a live server room?

Yes. Works are phased and prepared with your IT team: planned transfers, maintenance bypass, out-of-hours interventions where needed.

Should we aim for Tier III?

It depends on what downtime costs your business. Many enterprise rooms are well served by N+1 redundancy on power and cooling, without certification. We price the options so you can decide.

Do you work with a single brand?

No. We are independent of manufacturers and integrate equipment from several brands, including in monitoring.

Do you maintain installations you did not build?

Yes, after an audit that records the state of the equipment and what needs fixing.

Do we always need a full room?

No. For loads up to 5 kW, a remote site or a room without suitable cooling, a micro data center such as Edge DC 5 replaces the room with one cabinet.

Where do you work?

Across Morocco, from our head office in Rabat.

A data center or server room project?

Call or write to us. We start with a site visit and a first technical opinion, with no commitment.

Get in touch